Speaker Airpulse by Edifier A300 Cherry

Προσθέστε την κριτική σας


Παράδοση σε 4–10 ημέρες
SKU: 71a0c7a8eb96


Πρόσθεσε στην λίστα επιθυμιώνΠροστέθηκε στη λίστα επιθυμιώνΚαταργήθηκε από τη λίστα επιθυμιών 0

Airpulse A300 Hi-Res Wireless Plug-in Speaker System
Premium Hi-Res active speakers designed by Phil Jones
The A300 speakers combine the quality of a reference monitor and retro wood styling into an active bookshelf speaker.
Simplicity married to quality is our motto with AirPulse.
Connect the speakers to each other with the connecting cable and connect the speaker to your audio source directly with included cables.
These speakers are sold in pairs out of the box and includes a remote.
The A300 uses a thin aluminum horn loaded ribbon tweeter which extends frequency range and a well-defined resolution reaching to 40KHz high frequencies.
The horn shape adds to a three-dimensional sound as the ribbon tweeter is aimed at the listener and minimizes unwanted effects from room reflection.
The A300 active bookshelf speaker is equipped with a 6.5-inch aluminum alloy cone mid-range woofer unit.
Each magnet has a 50mm diameter edge-wound copper clad aluminum ribbon voice coil for maximum linear excursion and control.
Elevate your experience with the ST300 speaker stands from AirPulse. Made exclusively with the A300 active bookshelf speakers in mind.
AirPulse’s A300 is designed by Phil Jones. The technical and aesthetic designs are combined to create a next generation of audio.
The cabinets are made from 25mm MDF and finished with a cherry wood veneer finished in satin lacquer.
The cabinet is lined with a 36mm professional-grade sound absorption material reducing unwanted resonance.
The built-in amplifier uses 3 parts of the TAS5754 Class-D amplifier chipset from Texas Instrument.
Two chips are bridged in parallel driving the left and right woofers. Meanwhile, the third chip is set in bridge mode for both tweeters.
The SPDIF receiver uses a PCM 9211 from Texas Instrument that supports up to 216KHz input with a low output audio signal delivered to the XMOS processor with zero loss.
The USB audio interface supports UAC2 audio with input sample rate of 192KHz avoiding signal degradation and dynamic range loss via the PC audio DAC.
Included with the pair of speakers is a wireless remote that allows you to switch between inputs adjust volume and mute your speakers from a distance.
Connect your phone, laptop, computer and other devices with the following inputs. AUX, RCA, optical, coaxial, USB, professional balanced input, and Bluetooth.
The Bluetooth input uses version 5.0 and has support for aptX codec. Bass, treble and volume controls are located on the back panel.
TWEETER UNIT : Horn Loaded Ribbon Tweeter
AMPLIFIER SYSTEM: Digtal Amplifer With Xmos Processor
INPUT TYPE: AUX, Balance Input, USB, Optical, Coaxial, Bluetooth.
MAINS VOLTAGE: 100-240 V AC/50-60 Hz
MID-WOOFER: 6.5inch Aluminum Cone Underhung Design Neo. Power Mid-Woofer
TOTAL POWER OUTPUT: L/R(Treble):10W+10W, L/R(Woofer): 70W+70W
INPUT SENSITIVITY: AUX:700±50mV Balance:1150±50mV, USB:550±50mFFs, Optical:500±50mFFs Coaxial:500±50mFFs
CABINET SIZE: 225 x 385 x 340mm
NET WEIGHT: 24kg (53lbs)
WEIGHT: 29Kg (64lbs)

Προσδιορισμός: Speaker Airpulse by Edifier A300 Cherry


Κριτικές χρηστών

0.0 εκτός 5
Γράψτε μια κριτική

Δεν υπάρχουν σχόλια ακόμη.

Γίνετε ο πρώτος που θα αξιολογήσει το "Speaker Airpulse by Edifier A300 Cherry"

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Αυτός ο ιστότοπος χρησιμοποιεί το Akismet για να μειώσει τα ανεπιθύμητα σχόλια. Μάθετε πώς υφίστανται επεξεργασία τα δεδομένα των σχολίων σας.

Χρειάζεστε βοήθεια? Καλέστε την ομάδα υποστήριξης 24/7 στο 2114112160

Το mobilerepairs ιδρύθηκε το Μάρτιο του 2020. Ανήκει στην ομάδα της AlmaSoft και δραστηριοποιείται στο χώρο της επισκευής κινητών τηλεφώνων ηλεκτρονικών υπολογιστών και ηλεκτρονικών κυκλωμάτων.

Στα Γρήγορα


Καλάθι αγορών